Pre-inlet on Allen's patent 5 axis pantograph. Fully shaped, cut for our 42" octagon to round barrel. Pre-inlet for Track's Fusil lock, triggerguard, buttplate, trigger, trigger plate, sideplate, rod pipes, and drilled for a 3/8" rod.Our pattern was refined by Michael Hayes from a original Tulle musket found in Canada. Guns of this style were offered by French traders, across Canada and the Northern colonies, until the French were defeated by the British and ejected from Canada in 1763. Pull length is about 13-3/4", drop is 2-1/2" measured from the line of sights. Buttplate end is about 2" wide, and 4-3/4" tall. Representative walnut stock shown.
This stock is one of the easiest to assemble. Pre-inlet for our 20, or 24 gauge smoothbore, and .54, or .58 caliber rifled tapered octagon-to-round 42" fowler barrel. The barrel inlet is so crisp that the wedding bands are clearly visible in the barrel channel. Make the square cuts behind the plug, for a snap fit. The lock mortise is pre-inlet to accept the Track's French Fusil flint lock. The lock panels are well shaped with a tear drop tail at the rear of the lock panel. Pre-inlet to accept our wax cast brass or iron buttplate, trigger plate, and triggerguard. The forend is shaped and the ramrod entry, and two forward pipes are pre-inlet into the stock. The traditional flush mounted sideplate is inlet. A square vise block remains to allow easy mounting in a vise while working on the gun.
Specifications for pre-inlet stock:
This stock is one of the easiest to assemble. Pre-inlet for our 20, or 24 gauge smoothbore, and .54, or .58 caliber rifled tapered octagon-to-round 42" fowler barrel. The barrel inlet is so crisp that the wedding bands are clearly visible in the barrel channel. Make the square cuts behind the plug, for a snap fit. The lock mortise is pre-inlet to accept the Track's French Fusil flint lock. The lock panels are well shaped with a tear drop tail at the rear of the lock panel. Pre-inlet to accept our wax cast brass or iron buttplate, trigger plate, and triggerguard. The forend is shaped and the ramrod entry, and two forward pipes are pre-inlet into the stock. The traditional flush mounted sideplate is inlet. A square vise block remains to allow easy mounting in a vise while working on the gun.
Specifications for pre-inlet stock:
- Drop and trigger reach: Drop is 2-/12" from the line of sights to heel, at 13-3/4" length of pull
- Barrel channel size: #BBL-20-42 octagon-to-round 20 gauge smoothbore, 42" length, not recommended for shorter barrels. 24 gauge, .54 and .58 caliber rifled barrels also available
- Butt end: 2" wide by 4-3/4" high, cut for buttplate
- Butt plate: #BP-TULLE-2-B brass butt plate or #BP-TULLE-2-I iron butt plate
- Lock, flint: #LOCK-FUSIL Track's Tulle flint lock
- Lock, percussion: none available
- Ramrod hole & groove: 3/8" diameter, drilled full depth
- Ramrod pipes, entry: #RP-TULLE-E-2-6-B brass or #RP-TULLE-2-E-6-I iron
- Ramrod pipes, forward: #RP-TULLE-2-F-6-B brass or #RP-TULLE-2-F-6-I iron
- Trigger plate: #TR-TULLE--2-P trigger plate and #TR-TULLE-2-T trigger
- Triggerguard: #TG-TULLE-3-B brass triggerguard or #TG-TULLE-3-I iron triggerguard
Adobe Reader required to view the files below.
page_105.pdf
Last updated: 4/25/2012 (106 KB)