1 stock, Jim Bridger Hawken, pre-inlet, 1-1/8" tapered barrel, Jim Bridger lock, plain maple

1 stock, Jim Bridger Hawken, pre-inlet, 1-1/8" tapered barrel, Jim Bridger lock, fancy maple

1 stock, Jim Bridger Hawken, pre-inlet, 1-1/8" tapered barrel, Jim Bridger lock, extra fancy maple

1 Brass Trim

1 Iron Trim

1 Ramrod, 7/16" hickory, 48" long, brass tip, 10-32 thread Made in the U.S.A.

1 Ramrod, 7/16" hickory, 48" long, iron tip, 10-32 thread Made in the U.S.A.

1 Jim Bridger's Hawken 1-1/8" breech & tang, 3/4-16 thread

1 Front Sight Blank, .063" thick silver blade, copper base

1 Rear sight, semi-buckhorn up to 1-1/8" barrels, Jim Bridger's Hawken style

1 Rear sight, adjustable Hawken style, with five step elevation riser, by L&R

2 Underlug Staples, for thick keys, thin keys, or barrel pins

2 Wedge Key, slotted for capture pin, wax cast steel

2 Wedge Key, slotted for capture pin, wax cast brass

1 Jim Bridger's Hawken percussion lock, right hand, by R.E. Davis

1 Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, square shank, hardened steel, ideal for restoration Cone length: 0.440" Thread journal length: 0.195" Overall length: 0.635" Diameter of base: 0.307"

1 Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, stainless steel Cone length 0.440"Overall length: 0.635" Thread journal length: 0.195" Diameter of base: 0.307"

1 Hawken Double Set Trigger, designed by Ron Long

1 Under Rib for 1" octagon, smooth drawn steel, 22" length, made in the U. S. A. by Track of the Wolf, Inc.

1 Screws & Pins, complete set for Hawken halfstock rifle, unplated steel

1 Plan Drawing, full exact size, Hawken halfstock & fullstock rifles

1 Recreating the American Longrifle by William Buchele, George Shumway, Peter Alexander

1 Gunsmithing Labor: install breech plug, fitted inside

2 Gunsmithing Labor: mill dovetail & install sight, per operation

1 Gunsmithing Labor: mill dovetail and fit adjustable Hawken rear sight

4 Gunsmithing Labor: drill and tap blind hole to install rib, per operation

2 Gunsmithing Labor: mill and solder ramrod pipe to rib, price each

1 Double Punch for locating Track's underlug staples

1 Staking Tool, for securely staking staples, permanently

1 Pewter, one pound ingot of casting pewter for forend caps, with instructions