Our complete set of screws & pins for the 1746 Willit's Pattern Brown Bess are made of unplated or black oxide finished steel, with slotted heads. These are becoming scarce.
Our set includes:
We recommend that you also order: DRILL-3/32" to install the steel dowel pins, TAP-10-32-T taper tap and TAP-8-32-T taper tap, 8-32, to install the lock and tang bolt and other drill bits as needed for tap drills and clearance drills, for the several bolts and screws.
Our set includes:
- 2 #BOLT-BESS-46 lock bolt, 10-32, 17/32" head, for mounting the lock, plus
- 1 #BOLT-T-10-FL tang bolt, 10-32, countersink flat head, plus
- 1 #BOLT-T-8-S tang bolt, 8-32, for thumbpiece, plus
- 2 #SCREW-10x1V wood screws, #10 x 1", for mounting the buttplate, plus
- 1 #SCREW-10x1 wood screw, #10 x 1", for mounting the trigger guard, plus
- 10 #PIN-3/32 steel dowel pins, 3/32" diameter, for barrel lugs and rod pipes
We recommend that you also order: DRILL-3/32" to install the steel dowel pins, TAP-10-32-T taper tap and TAP-8-32-T taper tap, 8-32, to install the lock and tang bolt and other drill bits as needed for tap drills and clearance drills, for the several bolts and screws.
DRILL-3/32
drill bit, HSS, 3/32", .0938" diameter, drill for 3/32" pins
DRILL-13/64
drill bit, HSS, 13/64", .2031" diameter, clearance drill No. 10 bolt or screw
DRILL-16
drill bit, HSS, Number 16, .1770" diameter, clearance drill for No. 8 bolt or screw
DRILL-21
drill bit, HSS, Number 21, .1590" diameter, tap drill 10-32 thread
DRILL-29
drill bit, HSS, Number 29, .1360" diameter, tap drill for 8-32 thread
DRILL-CS-82-6
counter sink,
82 degrees, 3/8" diameter
TAP-8-32-T
Tap, high carbon steel, 8-32 thread, taper tap
TAP-10-32-T
Tap, 10-32 thread, high carbon steel, taper tap, to start a through hole
TAP-W-0
Tap handle, accepts #0 to #8 diameter taps
TAP-W-10
Tap handle, accepts #10 to 1/4" diameter taps
Adobe Reader required to view the files below.
page_109.pdf
Last updated: 4/25/2012 (119 KB)
page_192.pdf
Last updated: 4/25/2012 (195 KB)